Hear From Our Clients
You’re not fighting the weather anymore. When the temperature hits 95 and the humidity makes it feel like 105, you tap your phone and the louvers close to full shade. When a summer storm blows through at 4 PM, your furniture stays dry because the roof is already sealed.
This is what changes when you install a motorized pergola. Your outdoor space stops being seasonal. You’re not rushing to move cushions when the sky darkens. You’re not avoiding the patio from June through August because it’s unbearable out there.
The system integrates with your phone or smart home setup. Alexa, Google Home, or a remote—you control sunlight, airflow, and rain protection without getting up. Built-in LED lighting means you’re not dragging extension cords outside, and the integrated drainage system keeps water off your patio even during heavy rain. It’s the difference between having a backyard and actually using it.
We’ve been in the outdoor living business for nearly 50 years. We’re not new to this. We’ve installed sunrooms, patio covers, and motorized pergola systems across the Houston area, including right here in Pasadena.
Every installation is handled by our trained builders who understand how Texas weather impacts outdoor structures. We’re fully licensed and insured, and we use materials built to handle 120 MPH winds and the kind of humidity that rusts cheap aluminum in two summers. Our pergolas use 6063-T5 aluminum with triple-layer anti-corrosion coating because we know what lasts here and what doesn’t.
You’re working with a local team that knows Pasadena. We understand that your outdoor space needs to handle sudden storms, long stretches of heat, and the kind of sun that makes unshaded patios unusable by noon.
You start with a consultation. We come to your home in Pasadena, look at your space, talk about how you want to use it, and take measurements. You tell us what matters—shade, rain protection, lighting, screens—and we design the system around that.
Once the design is set, we handle permits and scheduling. Installation typically takes a few days depending on the size and features. Our crew builds the structure, runs the electrical for motors and lighting, integrates the drainage system, and connects everything to your control system of choice.
After installation, we walk you through how everything works. You’ll know how to adjust the louvers, set up automation, control the lights, and troubleshoot basic issues. We don’t leave until you’re comfortable operating the system. If something comes up later, you call us. We’re local, and we back up our work with a 10-year limited warranty on the structure.
Ready to get started?
The pergola itself is powder-coated aluminum, rust-resistant and built to last in high humidity. The motorized louvers adjust to any angle, so you control how much sun or breeze comes through. Close them completely and the roof is waterproof with an integrated gutter system that channels rain away from your patio.
Lighting is built in—seven color options, twenty brightness levels, all controlled through the same app or remote. You’re not installing separate fixtures or running extra wiring. Power outlets are integrated into the posts, so you can plug in speakers, fans, or a TV without extension cords snaking across your patio.
Optional retractable screens add another layer. They block insects and filter light without closing off your view. The whole system connects to Alexa or Google Home if you want voice control, or you can use the included remote. In Pasadena, where summer afternoons can swing from blazing sun to sudden downpours, this kind of control means you’re not constantly adjusting or worrying. The system adapts as fast as the weather does, and you’re the one deciding how your space feels at any given moment.
Cost depends on size, features, and site conditions. A standard motorized louvered pergola for a typical patio starts around $15,000 to $20,000. Larger structures, added screens, upgraded lighting, or complex installations can push that higher.
What affects price? Square footage is the biggest factor. A 10×12 pergola costs less than a 16×20. Features matter too—basic motorized louvers cost less than a system with integrated lighting, power outlets, and retractable screens. Site prep can add cost if we’re pouring new footings or dealing with uneven ground.
We offer financing up to $125,000 with competitive rates, so you’re not paying everything upfront. During your consultation, we give you a detailed quote based on your actual space and what you want included. No surprises, no upselling—just a clear number based on what you’re actually getting.
Yes, if it’s built right. Our pergolas use 6063-T5 aluminum with a triple-layer anti-corrosion coating. That’s not decorative—it’s engineered to resist rust in high humidity, which is critical in Southeast Texas where moisture sits heavy most of the year.
Cheap aluminum corrodes. You’ll see pitting, discoloration, and structural weakness within a few years. The powder coating we use is baked on in three layers, sealing the metal against moisture, salt air, and UV exposure. The motors are weather-rated and housed in sealed compartments to prevent moisture damage.
Texas heat doesn’t hurt aluminum—it’s the humidity that kills inferior materials. Our systems are tested to handle the climate here, and we back that up with a 10-year limited warranty on the structure. If you’re in Pasadena, you’re dealing with heat indexes over 100 for months at a time. The pergola itself won’t warp, fade, or fail under those conditions if it’s built with the right materials, which ours are.
The louvers stay in whatever position they were in when the power went out. If they were open, they stay open. If they were closed, they stay closed. The system doesn’t reset or move without power.
Most motorized pergolas, including ours, have a manual override. There’s a hand crank or release mechanism that lets you adjust the louvers manually if needed. It’s not something you’d want to do regularly, but it works in an emergency or during an extended outage.
If power outages are a concern, you can add a battery backup system. It’s an extra cost, but it keeps the motors functional during short outages. For most people in Pasadena, this isn’t necessary—power comes back quickly, and the louvers hold their position just fine. But if you want that extra layer of control, the option exists.
Very little. The aluminum doesn’t need painting or sealing. You’re mostly just keeping it clean. Rinse the louvers a few times a year to remove dust, pollen, and debris. If you’re near the coast or in an area with heavy pollen, you might rinse more often.
Check the gutters and drainage channels once or twice a year to make sure they’re not clogged. Leaves, dirt, and debris can block water flow, which defeats the purpose of the integrated drainage system. It takes five minutes and prevents bigger problems.
The motors are sealed and don’t require regular maintenance, but you should test the system periodically to make sure everything’s working. If you notice slower movement, unusual sounds, or the louvers not closing completely, call us. Most issues are minor and easy to fix if you catch them early. The system is designed to be low-maintenance, which is the point—you’re not babysitting it, you’re using it.
Yes. Retractable screens, additional lighting, ceiling fans, and upgraded controls can all be added later. The structure is designed to accommodate these additions without major modifications.
Retractable screens are the most common upgrade. They mount to the pergola frame and roll down when you need them, blocking insects and filtering light. They’re motorized like the louvers, so you control them the same way. Adding them later costs a bit more than including them upfront, but it’s absolutely doable.
Ceiling fans, heaters, and additional outlets can also be integrated after installation. We run the wiring and mount the fixtures to the existing structure. If you’re not sure what you want right now, start with the basics and add features as you figure out how you use the space. Most people in Pasadena add screens within the first year because mosquitoes and bugs make evenings miserable without them. But you don’t have to decide everything upfront.
Most installations take three to five days depending on size and complexity. A straightforward setup on an existing patio with level ground goes faster. A larger structure, site prep, or custom features like built-in kitchens or fireplaces take longer.
Day one is usually site prep and footings if needed. We dig, pour concrete, and let it cure. Day two and three are framing and assembly—we build the structure, mount the louvers, and install the motors. Day four is electrical work, lighting, and any added features like screens or outlets. Day five is testing, cleanup, and walkthrough.
Weather can delay things. If it rains heavily or we’re waiting on permits, the timeline shifts. We give you a schedule upfront and keep you updated if anything changes. Once we start, we work straight through until it’s done. You’re not dealing with a crew that shows up sporadically for weeks. We finish the job, make sure everything works, and then you’re using it.
Local Resources
Useful Links
Other Services we provide in Pasadena
